Grade 10 Load Binders

Last modified: July 29th, 2020
by
  • Pewag winner RSW Load binder

This load binder for one-part lashing chains in accordance with EN 12195-3 is also suitable for frictional lashing, depending on the selected lever length (always take the STF value into account!). It has a 25 % higher lashing capacity than grade 8 and is manufactured according to EN 12195-3.

  • Pewag winner RSPSW Load binder

This load binder for two-part lashing chain systems in accordance with EN 12195-3 is intended for the ZKW lashing chain – the two are always used in conjunction. The shortening hook with the PSW safety catch is already assembled. Depending on the selected lever length (always take the STF value into account!), all sizes are also suitable for frictional lashing.
The lashing capacity is 25 % higher than for grade 8. As specified in the full operating manual, this load binder is not suitable for lifting or attaching loads. Thanks to the pre-mounted shortening hook, the RSPSW load binder may be positioned anywhere in the ZKW lashing chain.

Last modified: July 29th, 2020 by