Lifting Chain – Prolift Handling Ltd

Pewag Offshore Chains

stmngr1uk — Sat, 18 Jul 2020 21:39:06 +0000

OFFSH-DNV 2.7-1 Offshore lifting chain With special heat treatment to increase toughness, crack detection tested, Charpy-V notch impact result min. 42J (27J in the weld) at -20 °C. Stated working load limit applies with safety factor 4. Proof tested at 2.5 x working load limit. Higher alloyed steel than required according to standard. Production according to EN 818‑2 and DNV 2.7-1 and/or EN 12079-2. For the assembly of chain slings for offshore container lifting procedures. Type approved in accordance with DNV 2.7-1. Type approval certificate no. S-8253.

The post Pewag Offshore Chains first appeared on Prolift Handling Ltd.

Pewag Stainless Steel Chains

stmngr1uk — Sun, 12 Jul 2020 03:35:01 +0000

WOX Chain inox This stainless steel lifting chain is made from high-grade stainless steel, with a load capacity that is 25 % higher than that of G5 lifting chains. The chains are tested at 100 % of their load capacity, which is an impressive 12,000 kg. The chain is electrically welded for an extra-clean finish, stamped and with higher resistance to acids and caustics than the standard lifting chains G8, G10 and G12. The chain is guaranteed to be compatible with the Connex CWI links, with dimensions that are similar to DIN 5687-1 and EN 818‑2. The stamp makes the chains clearly identifiable. WOX-S Chain inox The Pewag Wox chain is also developed further for use in specific pump chain applications, opening up an even wider range of possible use. The WOX-S chain is the brilliant result of these development efforts and makes an ideal addition to the Pewag range of pump chains. When assembled as a service pump chain, it may only be used in conjunction with specific lifting appliances. The chain has a higher resistance to acids and caustic solutions and is easy to identify thanks to the distinctive WOX-S marking. The WOX-S is now ready for use as part of your pump chain system!

The post Pewag Stainless Steel Chains first appeared on Prolift Handling Ltd.

Pewag Galvanised Chains

stmngr1uk — Sun, 12 Jul 2020 03:20:16 +0000

Pewag KWF Galvanised Chain Galvanizing plants use various types of sling chains for lifting and transporting parts to be galvanized and for adding zinc ingots. Chains, particularly those used during the galvanizing process, are subject to extraordinarily high stress:

They are heated up to approx. 475°C in the galvanizing bath.
They are subjected to zinc corrosion.
The hydrogen that develops during the repeated work cycles of, galvanizing – pickling – galvanizing“ in the galvanizing bath has a considerable effect on the chains.

The post Pewag Galvanised Chains first appeared on Prolift Handling Ltd.

Pewag Pump Chains

stmngr1uk — Sun, 12 Jul 2020 03:19:16 +0000

The high-grade pump chains have a load capacity that ranges from 320 to max. 12,000 kg. Their welded design, solid construction and range of components makes them particularly suitable for submersible pumps and breathers in water and wastewater applications. These pump chains are tested for perfection and serialised with a dedicated identification tag and test certificate, issued individually for each chain. Enlarged master links at the beginning, at segmented intervals and at the end of the chain make them ideally suited for step-by-step lowering, lifting or locking. Upon request, we also offer customised variations:

Two-legged system with “Y” for pumps equipped with 2 eye screws.
Alternative end fittings, such as eye hooks, BWI links or shackles.
Additional stabilisation chain.
Variation of standard segment length.
Customised models available.
Stainless steel hoist chains for pump stations are available upon request.

The post Pewag Pump Chains first appeared on Prolift Handling Ltd.

Grade 12 Pewag Chains

stmngr1uk — Sun, 12 Jul 2020 03:14:08 +0000

WINPRO Flex 300 PC/B (blue) WINPRO Flex 300 PCP (black) WINPRO FLEX 200 LAC/GY (grey)

These chains have an added load capacity of at least 50 % compared to grade 8 and are manufactured in compliance with PAS 1061 (with modifications).
A reduction of the chain dimension and thus also of the weight of the chain sling is possible in almost any application.
This high-performance, grade 12 chains comes with BG-approval and also offers added resistance against edge loading thanks to its profile sections.
The profiled steel chain in G12 is particularly robust and available with a light blue powder-coated surface and with a black corropro coating.

The post Grade 12 Pewag Chains first appeared on Prolift Handling Ltd.

Grade 10 Pewag Chains

stmngr1uk — Sun, 12 Jul 2020 03:07:44 +0000

Winner 400 Lifting chain These grade 10 high-duty chains are manufactured according to EN 818‑2 with mechanical values for G10/PAS 1061. Further, they are BG-approved and are ideal for the assembly of chain slings and lashing chains as well as for lifting and transporting loads. The permitted operating temperature ranges from -40 °C to + 380 °C. The standard surface is blue and the chains are available in dimensions from 5 to 32 mm Winner 200 Round steel chain The winner 200 round-steel chains are particularly suitable in lifting and lashing chains and withstand operating temperatures between -40 °C and +200 °C. These chains are available in dimensions from 5 to 32 mm and the standard surface is blasted and clear painted.

The post Grade 10 Pewag Chains first appeared on Prolift Handling Ltd.