Pewag Lifting Points – Prolift Handling Ltd

PLE/N Eta

stmngr1uk — Thu, 18 Jun 2020 19:38:16 +0000

Welding onto machine parts or vehicle bodies requires special products that are ideally suited for the hanging of lifting and lashing parts – and PLE Pewag ETA (grade 8) is one of them. In fact, the product has made a name for itself among high strength weldable lifting point, also for its integrated spring that keeps the ring in any position that is required. The product may be loaded in all directions. Ideal for mounting lifting slings or lashing devices, mind welding instructions.

The post PLE/N Eta first appeared on Prolift Handling Ltd.

PLEW Eta

stmngr1uk — Thu, 18 Jun 2020 19:33:01 +0000

The Pewag PLEW is a lifting point that is welded onto loads so that lifting chain components (hooks, shackles, straps) may be attached to enable the load to be lifted. The PLEW has a higher rated capacity than the Pewag PLE/N and additionally can be loaded higher in the preferred load direction (see user manual). The grooves on the weld-on bracket at 45° and 60° simplify the recognition of the permitted inclination.

The post PLEW Eta first appeared on Prolift Handling Ltd.

PLZW Zeta

stmngr1uk — Thu, 18 Jun 2020 19:32:11 +0000

PLZW Zeta can be assembled and disassembled without tools. The PLZW Zeta thus enables the attachment of closed lifting equipment such as eye sling hooks or rope loops without the use of additional shackles. The latest addition to pewag‘s range of lifting points is released with a five-fold security against breakage, can be rotated 360° and can be loaded in all directions. In addition, the individual serial number, as well as the batch code, enable the lifting point to be clearly identified at any time. The PLZW Zeta protects the surface of the load from damage by integrating a sleeve. The replaceable eyebolt is 100% crack tested and has chrome-VI-free corrosion protection as well as marking with load capacity, thread size and tightening torque. The lifting point is mounted in the desired position by using tools.

The post PLZW Zeta first appeared on Prolift Handling Ltd.

PLDW Delta

stmngr1uk — Thu, 18 Jun 2020 19:25:54 +0000

This lifting point comes with a ball bearing and is rotatable by 360° even under load.
The high-strength lifting eye is movable by 180°.
The special screw is 100% crack-tested, protected against corrosion and marked with the load capacity and thread size.
The high-strength lifting eye comes with a ring and is wide enough to accommodate even larger hooks.
operating temperature: -40 °C to 200 °C

The post PLDW Delta first appeared on Prolift Handling Ltd.

PLGW-SN

stmngr1uk — Thu, 18 Jun 2020 19:14:32 +0000

This screw nut works on the principle of tool-free assembly, which makes it unique worldwide. It takes the successful Pewag PLGW supreme eyebolt one step further and is used on loads that come with a threaded bolt instead of a thread. Alternatively, the PLGW-SN supreme lifting point may be attached in a through-hole using a standard screw, which has the additional advantage of being able to use the same lifting point with different material thicknesses. Some other benefits of the PLGW-SN:

No tools are required for assembly or disassembly
Saves time, especially if frequent assembly/disassembly takes place
The lifting point is rotatable (may be set in the load direction) and loadable in all directions

The post PLGW-SN first appeared on Prolift Handling Ltd.

PLGW Gamma

stmngr1uk — Thu, 18 Jun 2020 18:47:11 +0000

The eyebolt is 360° rotatable, comes with an interchangeable special screw that is 100% crack-tested as well as chrome VI-free finish-protection against corrosion and is marked with the load capacity and the thread size. An integrated sleeve protects the surface of the load. The batch number displayed on all load-bearing parts such as the eye and screw as well as the serial number make the identification, traceability and performance of mandatory, regular inspections simpler than ever. It comes in two types: PLGW basic: This lifting point can be mounted hand tight using a standard Allen key then aligned in the load direction. However, if the lifting point is to be utilised in a more permanent application the torque settings in the user manual must be observed PLGW supreme: tool-free assembly and disassembly.

The post PLGW Gamma first appeared on Prolift Handling Ltd.

PLBW Beta

stmngr1uk — Thu, 18 Jun 2020 18:37:30 +0000

This is another lifting point that is 360° rotatable. The load ring is movable to an angle of 180° and can be positioned at any required angle due to its replaceable and patented spring. In the permitted applications, this lifting point offers five-fold safety. Due to the Pewag quality standard, each lifting point comes with an individual serial number. The lifting points are marked with the admissible load capacity for the most unfavourable application mode, allowing for an increased load capacity in case of vertical loads. The hexagonal special screw made from grade 10.9 material is also interchangeable and secured against loss. The screw is 100% crack-tested as well as covered with a chromate VI-free protection against corrosion and marked with the load capacity and thread size. It can be tightened with a hexagon wrench or spanner wrench. Pewag winner profilift beta is available with metric or UNC-thread. The versions with metric thread are also available with customised thread lengths.

The post PLBW Beta first appeared on Prolift Handling Ltd.

AWHW Weld-on Hook

stmngr1uk — Thu, 18 Jun 2020 18:15:42 +0000

This high-strength hook is particularly well suited for welding onto excavator bucket, spreader beams etc. Its outstanding features include a die-forged, tempered safety catch, making it extra robust. As the safety catch locks into the tip of the hook, it provides excellent protection against lateral shifting. The product is manufactured according to EN 1677‑1 with higher load capacity and comes with full operating and welding instructions. A CE-marking further emphasises the superior quality of this product. Replacing the SFGW-A safety catch set is easy and quick, without the need for special tools

The post AWHW Weld-on Hook first appeared on Prolift Handling Ltd.

PLGWI Gamma Inox

stmngr1uk — Thu, 18 Jun 2020 18:13:37 +0000

This lifting point can be mounted hand tight using a standard Allen key then aligned in the load direction. But the PLGWI offers even more than that:

The eyebolt is 360° rotatable, comes with an interchangeable special screw that is 100% crack-tested and marked with the load capacity and the thread size!
An integrated sleeve protects the surface of the load.
Extendable areas of application thanks to Duplex steel with heightened corrosion-resistance.
The PRE/N value that determines the alloy composition and thus also the level of corrosion resistance lies at approx. 34.

The post PLGWI Gamma Inox first appeared on Prolift Handling Ltd.

AOR Lashing point

stmngr1uk — Thu, 18 Jun 2020 17:40:29 +0000

When it comes to reliability, this lashing point won’t be beaten. It is perfect for mounting machine parts or vehicle bodies as well as for the hanging of lifting and lashing gear. The AOR Lashing points are intended for attachment to steel, aluminium or non-ferrous metal structures and components. They serve to connect the structures and components to hoisting means used for handling. The AOR Lashing points must exclusively be used: • as prescribed by their permissible load carrying capacity • within the temperature limits prescribed • with appropriate screws/bolts • firmly attached to the components to be lifted • occasionally turning or rotating loads • Continuous or long term turning or rotating is not allowed

The post AOR Lashing point first appeared on Prolift Handling Ltd.