Lifting and Spreader Beams – Prolift Handling Ltd

Modulift Load Monitoring Spreader Beam

stmngr1uk — Thu, 13 Aug 2020 00:40:37 +0000

Modulift has produced the WORLDS FIRST load monitoring Spreader Beam, with an integrated loadcell (Active Link) giving you instant wireless data logging! The innovative Active Link provides wireless real-time data by measuring the load at either end of the spreader beam. It is capable of both weighing and dynamic load monitoring. Data is transmitted wirelessly to a USB transceiver that must be connected to a Windows computer or tablet with a spare USB port Benefits:

Reduce your rigging and the weight
Simplified, integrated load equalisation capability
Can be purchased separately for existing valued customers
Compatible with existing spreader beams
No more overloading shackles and slings
Saving you time and money on rigging

The post Modulift Load Monitoring Spreader Beam first appeared on Prolift Handling Ltd.

Adjustable Lifting/Spreader Beam

stmngr1uk — Thu, 13 Aug 2020 00:11:22 +0000

The Modulift Adjustable/Spreader Beam (MOD CLS) can now lift up to 27t and has a new and improved clamp system, tested to the highest standards, enabling safe lifting from multiple points. Main benefits are:

Spans of up to 16m and capacities of up to 27t depending on the configuration
Adjustable lifting points and low headroom capability
Easy to convert between a lifting beam and a semi spreader beam
Available as a boxed off-the-shelf product

The clamps are pre-assembled with a redesigned safety mechanism, which means that it’s easier for one person to operate and to slide and safely lock into place. In testing trials, this has been done in under one minute. It is offered with four clamps as standard to adjust the lifting points to enable flexibility between a single top lifting point (lifting beam) or double top lifting points (semi spreader beam). We can also supply custom length beams depending on your lifting requirements. The MOD CLS can also be adapted to suit, with up to an additional four clamps on the bottom side of the beam allowing users the flexibility of additional lifting points. If more points are needed, the flexible system can also be designed as a H-Frame.

The post Adjustable Lifting/Spreader Beam first appeared on Prolift Handling Ltd.

Modulift Modular Spreader Frames

stmngr1uk — Wed, 12 Aug 2020 23:56:18 +0000

Spreader Frames and Lifting Frames are recommended for loads that have more than two lifting points. They can also be the ideal lifting equipment for when headroom is limited. Modulift offers several types of Spreader Frames and Lifting Frames for Multi-Point Lifts. Please see below for further details of Spreader Frames and Lifting Frames. CMOD The most economical option is the CMOD Modular Spreader Frame, designed to expand the capabilities of our Modular Spreader Beam System - the Struts from the Spreader Beam are combined with 4 Corner Units to complete the Frame. Customers that already have Modulift Struts can re-use these with the Corner Units to achieve 4-Point lifts, making this a versatile solution. This Spreader Frame is also designed for where there are height restrictions, as the height of the rig will be lower than a ‘1 over 2’ rig. The CMOD Spreader Frame is currently available from the CMOD 6 up to the CMOD 250. The systems will lift up to 300t. CMOD T-Pieces Expanding on a very popular CMOD Spreader Frame, Modulift has designed and manufactured a T Piece conjunction to further develop the capabilities of the CMOD Spreader Frame. This fantastic connection allows the frame to become a 6 point or 8 points heavy lift. Benefits:

With more lifting points, there is more support for larger and heavier lifts
Reduces rigging time compared to a cascading spreader beam arrangement
Lower headroom compared to a cascading spreader beam arrangement

8 point Lift: The T Piece CMOD Spreader Frame (8 Point) is modular in span, and every frame consists of 4 Corner Units and 4 T Pieces, with intermediate struts that can be bolted into the assembly to achieve a range of spans. 6 Point Lift: The T Piece CMOD Spreader Frame (6 Point) is modular in span, and every frame consists of 4 Corner Units and 2 T Pieces, with intermediate struts that can be bolted into the assembly to achieve a range of spans. Low Height Lifting Frames For lifts where height is severely restricted, Modulift can design and manufacture Low-Height Lifting Frames. Similar to Spreader Frames, but whereas Spreader Frames have top Slings attached between the frame corners up to the crane hook in the centre, instead a Lifting Frame generally has no top slings – rather the crane hook attaches directly to a large lug on the top of the frame in the centre

The post Modulift Modular Spreader Frames first appeared on Prolift Handling Ltd.

Modulift Modular Spreader Beams

stmngr1uk — Wed, 12 Aug 2020 23:20:58 +0000

Modular Spreader Beams provide the ideal solution for most lifting requirements – versatile and cost-effective, the Modulift range has capacity from 2t to 5000t with spans up to 100m/330’. The modular configuration and interchangeable components enable Modulift Spreaders to be reused over many lifts. Designed by our engineering experts and manufactured in our own specialist facilities; the Modulift range is the leading Modular Spreader Beams on the market. Every Modulift Modular Spreader Beam consists of a pair of End Units and a pair of Drop Links, with interchangeable struts that can be bolted into the assembly between the End Units to either lengthen or shorten the beam to suit the requirements of the lift, making them reusable at different spans. Features:

Quality Engineering Modulift are a team of specialist engineers designing innovative products to optimum specification to ensure a safe lifting environment around the world.
Standards and Regulations Conforming with all international standards, Modulift Spreader Beams are certified wherever you are working.
DNV Type Approval Modulift Spreader Beams have DNV Type Approval up to 1500t eliminating the need for costly proof load testing.
Interchangeable The modular design allows for multiple lengths to be configured for a variety of lifts. Mix and match end units with struts when long spans and lightweight lifts are required.
Economical One Modulift Spreader Beam can be used over and over again for years.
Portable longest strut is only 6m/20’ – small enough for the back of a truck! Many of our Spreader Beam components can be handled by one person.
Lightweight Our Spreader Beams are specially designed to provide you with a lightweight solution so your cranes can work at maximum capacity without the weight of heavy lifting gear.
Custom Applications Spreader Beam can be custom designed for virtually any lift. Contact us for this service.

The post Modulift Modular Spreader Beams first appeared on Prolift Handling Ltd.