Hoists and Trolleys – Prolift Handling Ltd

Electric Chain Hoist Verlinde VR (63 to 10,000KG)

stmngr1uk — Wed, 08 Jul 2020 11:19:35 +0000

Features:

New lifting nut concept with intermediate teeth for perfect chain drive
Torque limiter
Disk lifting brake3m standard lifting height
Dual-speed lifting
Safety electric end of run for up and down position
IP55 lifting and travelling motor
Thermal protection on lifting motor
Tropic-proof protection (lifting and steering – 90 to 95 %)
Galvanised lifting chain
Disconnectable command cable
2-buttons unit on fixed hoist or push steering carriage
4-buttons unit on hoist coupled to electric steering carriage
Punch emergency stop button
400V/3Ph/50Hz or 415V/3Ph/50 Hz or 460V/3 Ph/60 Hz power supply low voltage 48 V command
Chain bag
70 mm, RAL 7021 epoxy powder paint
Speed variation on travelling – MS Mode (for hoists with an electric trolley) Complies with the CE machine directive

The post Electric Chain Hoist Verlinde VR (63 to 10,000KG) first appeared on Prolift Handling Ltd.

Electric Chain Hoist Liftket Star VFD 125KG to 2000 KG

stmngr1uk — Thu, 02 Jul 2020 14:39:36 +0000

Load-dependent, infinitely variable control from 2 to 36 m/min
Up to 200 % faster without load
Easy-to-read display with operating hours, remaining service life according to FEM
Brake cycles and starts
3 m lifting height
1.5 m control cable
Control pendant with emergency stop
Safe load handling through revolutionary QUICK STOP
High-end industrial hoisting limit switches (up/down)
Thermal sensor for lifting motor and electronics

The post Electric Chain Hoist Liftket Star VFD 125KG to 2000 KG first appeared on Prolift Handling Ltd.

Electric chain hoists B13/Power Liftket 4000 KG to 25000 KG

stmngr1uk — Thu, 02 Jul 2020 13:26:30 +0000

Two different models are available in high lifting capacity range: LIFTKET B13 and our POWER LIFTKET LIFTKET B13 can be ordered for loads weighing between 4,000 and 12,500 kg. It can be ordered with single or double fall execution and the option of a suspension eye, a hook suspension or an electric trolley. LIFTKET B13 can be ordered for loads weighing between 4,000 and 12,500 kg. It can be ordered with single or double fall execution and the option of a suspension eye, a hook suspension or an electric trolley. POWER LIFTKET is available with single or double fall execution and the option of a suspension eye or an electric trolley for loads between 8,000 kg and 25,000 kg.

The post Electric chain hoists B13/Power Liftket 4000 KG to 25000 KG first appeared on Prolift Handling Ltd.

Electric Chain Hoist Star Liftket 125 KG to 6300 KG

stmngr1uk — Thu, 02 Jul 2020 11:44:09 +0000

High duty rate
Patented clutch system
First-class material and technologies
Extremely low maintenance design
Contactor control with conventional and individually interchangeable components
Conversion of single fall to double fall and vice versa – easy, fast and failsafe – this work has been reduced now to a few minutes. This new solution ensures exceptional protection against assembly errors.

The post Electric Chain Hoist Star Liftket 125 KG to 6300 KG first appeared on Prolift Handling Ltd.

Verlinde Eurobloc VT9 to 12 (10,000 to 250,000 KG)

stmngr1uk — Thu, 02 Jul 2020 09:36:40 +0000

Electric wire rope hoist for loads of 10,000 to 250,000 kg Verlinde has extended EUROBLOC VT family to include the VT9-10-11 and 12. This line of open winches offers technical solutions to meet your requirements for :

A greater hoist capacity
Lifting height (up to 129 m)
Utilisation group (ISO classification up to M6)
Hoist speed
Speed control (speed variation)

Features:

High performance hoisting motor.
Variable lifting speed drive with closed loop technology.
Variable speed drive for travelling.
Lifting motor with encoders.
High safety hoisting and travelling brake (disk brake).
High-performance cast rope guide.
4 step gear limit switches for lifting
Double safety system for end of travel lifting (limit switches with detection of top and bottom position together with a limit switch tripped by the rope lead-off).
2 steps travelling limits switches included as standard.
System for monitoring the state of the hoist : MT2.
Lubrication unit (as an option).
Intelligence brake monitoring by inverter drive with detection of the load slip or blocking.
Overload protection.
IP55 components.
F/H class of hoisting motor insulation, IP55 protection.
Thermal protections on the lifting and travelling motors.
“Ready-to-use” connection units. MT2 to be configured on the site.
Connection units with interior lighting.
108 dB horn.
PLIOTEX cable marking.
Epoxy resin painting (thickness : 120 μm).

The post Verlinde Eurobloc VT9 to 12 (10,000 to 250,000 KG) first appeared on Prolift Handling Ltd.

Verlinde VT Electric Wire Rope Hoist 800 KG to 80,000 KG

stmngr1uk — Wed, 01 Jul 2020 19:13:14 +0000

The Eurobloc VT electric wire rope hoist is a quality, heavy-duty hoist best suited for high lifting capacities of 10,000kg or more and offers fast lifting speeds. Features:

Two-speed pole-change hoisting motors with bi-metal sensor
Variable speed travelling motors: 3 to 20 m lmn (hoist with trolley- Inverter with MS mode)
Hoist electrics cubicle without low voltage transformer and without On/Off contactor
Standard power supply: – 380V/400V/415V/50Hz – 440V/460V/60Hz
Motor protection IP55 I insulation class F
Without Push button box
Hook with safety latch
Tropicalized motor for hoisting and travelling
Rope guide for use in aggressive environment
Rubber buffers (for hoist with trolley)
Test certificate
Hook certificate
Wire rope certificate
Hoist owner’s manual according to EEC regulations
Set of electrical diagrams
EC Certificate of Conformity

The post Verlinde VT Electric Wire Rope Hoist 800 KG to 80,000 KG first appeared on Prolift Handling Ltd.

Verlinde VM Electric Wire Rope Hoist (2,000 to 20,000 KG)

stmngr1uk — Wed, 01 Jul 2020 18:29:09 +0000

The Eurobloc VM Essentials electric wire rope hoist has been designed for use with crane kits only. Controlled by pendant or radio control, the Eurobloc VM is a more economical alternative to the VT electric wire rope hoist as unlike the VT as it’s optimised for use on an overhead/underslung crane. The VM Essentials electric wire rope hoist is able to lift loads ranging from 2,000kg to 20,000kg. Features:

Power supply: 400 V/3 ph/50 Hz.
Control voltage: 48 V.
Working temperatures: +5 °C to +40 °C.
Lifting limit switch activates by hook block.
Overload indication by lighting or audible signal.
Variable speed for travelling.

The post Verlinde VM Electric Wire Rope Hoist (2,000 to 20,000 KG) first appeared on Prolift Handling Ltd.

Kito TMH Mini Trolley – 250 KG

stmngr1uk — Tue, 30 Jun 2020 16:55:24 +0000

Features:

Capacity: 250 kg
Standard flange: 50 – 100 mm
Min. Radius for Curve: only 600 mm
Net weight: 1,9 kg
Heat-treated wheels are hardened for long life
With adjustable spacers
Integrated drop stops for fall protection of the trolley and the hoist from the beam-ends

The post Kito TMH Mini Trolley - 250 KG first appeared on Prolift Handling Ltd.

Kito TK Beam Clamp

stmngr1uk — Tue, 30 Jun 2020 16:46:49 +0000

Features:

Lifting capacities ranging from 1 t to 10 t
Very light net weight
2 different flange ranges
Corrosion-resistant galvanized parts
Self-centering shaft design
Specially designed jaws spread the load over a larger area of the beam and reduce beam stress
Shackle as standard

The post Kito TK Beam Clamp first appeared on Prolift Handling Ltd.

Kito TSG Gear Trolley 125 KG – 30T

stmngr1uk — Tue, 30 Jun 2020 16:26:20 +0000

Features:

Capacity ranging from 125 kg – 30 t
Net weight: 12 kg (TSG001 – TSG005)
Different kinds of flange widths
Adjustable to fit any tapered or flat-flanged beams
Safety lugs and bumpers
Suspender for close connected suspension and / or hook suspension type (not necessary from 5 t capacity)
Heat-treated steel wheels are hardened for long life
Maintenance-friendly sealed ball bearings
3 meter hand chain length (folded)

The post Kito TSG Gear Trolley 125 KG - 30T first appeared on Prolift Handling Ltd.