Electric Wire Rope Hoists – Prolift Handling Ltd

Verlinde Eurobloc VT9 to 12 (10,000 to 250,000 KG)

stmngr1uk — Thu, 02 Jul 2020 09:36:40 +0000

Electric wire rope hoist for loads of 10,000 to 250,000 kg Verlinde has extended EUROBLOC VT family to include the VT9-10-11 and 12. This line of open winches offers technical solutions to meet your requirements for :

A greater hoist capacity
Lifting height (up to 129 m)
Utilisation group (ISO classification up to M6)
Hoist speed
Speed control (speed variation)

Features:

High performance hoisting motor.
Variable lifting speed drive with closed loop technology.
Variable speed drive for travelling.
Lifting motor with encoders.
High safety hoisting and travelling brake (disk brake).
High-performance cast rope guide.
4 step gear limit switches for lifting
Double safety system for end of travel lifting (limit switches with detection of top and bottom position together with a limit switch tripped by the rope lead-off).
2 steps travelling limits switches included as standard.
System for monitoring the state of the hoist : MT2.
Lubrication unit (as an option).
Intelligence brake monitoring by inverter drive with detection of the load slip or blocking.
Overload protection.
IP55 components.
F/H class of hoisting motor insulation, IP55 protection.
Thermal protections on the lifting and travelling motors.
“Ready-to-use” connection units. MT2 to be configured on the site.
Connection units with interior lighting.
108 dB horn.
PLIOTEX cable marking.
Epoxy resin painting (thickness : 120 μm).

The post Verlinde Eurobloc VT9 to 12 (10,000 to 250,000 KG) first appeared on Prolift Handling Ltd.

Verlinde VT Electric Wire Rope Hoist 800 KG to 80,000 KG

stmngr1uk — Wed, 01 Jul 2020 19:13:14 +0000

The Eurobloc VT electric wire rope hoist is a quality, heavy-duty hoist best suited for high lifting capacities of 10,000kg or more and offers fast lifting speeds. Features:

Two-speed pole-change hoisting motors with bi-metal sensor
Variable speed travelling motors: 3 to 20 m lmn (hoist with trolley- Inverter with MS mode)
Hoist electrics cubicle without low voltage transformer and without On/Off contactor
Standard power supply: – 380V/400V/415V/50Hz – 440V/460V/60Hz
Motor protection IP55 I insulation class F
Without Push button box
Hook with safety latch
Tropicalized motor for hoisting and travelling
Rope guide for use in aggressive environment
Rubber buffers (for hoist with trolley)
Test certificate
Hook certificate
Wire rope certificate
Hoist owner’s manual according to EEC regulations
Set of electrical diagrams
EC Certificate of Conformity

The post Verlinde VT Electric Wire Rope Hoist 800 KG to 80,000 KG first appeared on Prolift Handling Ltd.

Verlinde VM Electric Wire Rope Hoist (2,000 to 20,000 KG)

stmngr1uk — Wed, 01 Jul 2020 18:29:09 +0000

The Eurobloc VM Essentials electric wire rope hoist has been designed for use with crane kits only. Controlled by pendant or radio control, the Eurobloc VM is a more economical alternative to the VT electric wire rope hoist as unlike the VT as it’s optimised for use on an overhead/underslung crane. The VM Essentials electric wire rope hoist is able to lift loads ranging from 2,000kg to 20,000kg. Features:

Power supply: 400 V/3 ph/50 Hz.
Control voltage: 48 V.
Working temperatures: +5 °C to +40 °C.
Lifting limit switch activates by hook block.
Overload indication by lighting or audible signal.
Variable speed for travelling.

The post Verlinde VM Electric Wire Rope Hoist (2,000 to 20,000 KG) first appeared on Prolift Handling Ltd.